What to Do When a Washer Spins But The Clothes Are Still Soaked

What to do when a washer spins but the clothes are still soaked. A washing machine is a vital appliance in any household as it helps us keep our clothes clean.

When you wash your clothes at home, and the washing machine starts to spin your clothes, you expect them to come out clean.

There could be several causes for this to happen, and this blog will look at some of the possible reasons for such an issue and how you can fix it.

What to Do When a Washer Spins But The Clothes Are Still Soaked

things to check when a washer spins but the clothes are still soaked

Are your clothes coming out of the dryer still damp? While there are a few different reasons why this could be happening, the best way to fix it is to check the lint trap.

If that’s not the problem, it may be caused by a faulty dryer. The dryer is used regularly by houses, and it’s essential to have it running smoothly to dry your clothes and keep them in good condition.

If you’re washing clothes that don’t have a lot of excess dye in them, the problem could be a clogged pipe or a faulty motor. It’s best not to use your dryer if it’s not working correctly.

Washer Using Extension Cord

To find out what to do if your laundry is coming out too wet, one should make sure their washer uses a standard power cord that they plug into the wall.

Never use an extension cord with their washing machine because most extension cords don’t transmit the level of electricity used in the devices and could potentially damage it.

If you are experiencing decreased spin speed, or clothes are coming out of the washer wet instead of dried, it may be because your washer doesn’t have enough energy to power its cycles.

Using an extension cord with a washer grounded in one outlet can cause the unit to overheat and shut down mid-cycle – which affects the quality of your wash, not just the speed.

Drain Pump Is Clogged

Every so often, check the drain pump. Check for debris lodged into the pump itself or test if it is working correctly.

Remove the drain hose and back panel and look for any blockages in the pump. If you find none, you can use a multimeter to test whether or not the pump works!

To test the drain pump, you need to take the wire connectors off both terminals on the drain pump. Testing each terminal should result in reading between 5 to 10 ohms.

If the reading is anything else, the drain pump will need to be replaced and cleaned.

Using the Wrong Cycle Settings

washing machine using wrong cycles

When your clothes come out too wet from the washing machine, be sure to check the cycle settings on your machine. Delicate or hand wash cycles may use a slower spin speed or no spin to provide a more gentle wash.

Make sure you have selected the right cycle setting for your washing load.

Many washers are equipped with the option of adjusting the spin speed. If your washer leaves clothes wet, increase the speed to ensure that your laundry isn’t dripping wet as you take it out at the end of a wash.

Inlet Valve is Loose

Your washing machine also has what’s known as an inlet valve, which is a valve installed inside the washing machine that controls whether the water flows into the washer from the faucet or not.

If the laundry machine has a loose inlet valve, it drips water into the drum where it collects and can have a soaking effect on your clothes.

Tighten or replace this inlet valve to stop water from getting into your drum and potentially damaging your clothes.

Drain Filter is Clogged

The drain filter helps prevent items from entering your drain pump, preventing damage or clogs.

This will catch things like lint and pet hair and more oversized items commonly left in pockets like coins, keys, pins, or even tiny socks.

If the filter gets clogged, water has no place to pass through and will be sent back into the drum where it cannot do a thing.

Checking the drain filter is an easy fix when your washer isn’t draining. Typically, this filter is located on your washer’s front access panel, and it’s straightforward to get to.

Never cleaned it before? Then clean it now – this should help you eliminate any drainage issues you are experiencing.


We hope you enjoyed my five helpful tips for when the washer spins but clothes are still soaked.

If you have any questions or comments, feel free to leave them in the comment section below. We would also love to hear about your experience with any of the tips we discussed.

So please share your experience with us in the comment section below!

Thank you for reading, and best of luck!

Related Post