Maytag Centennial Washer Not Spinning

Maytag centennial washer not spinning. The Maytag washing machine is, without a doubt, one of the brand’s most popular items.

It has enough zip and vigor to make a mundane task like doing the laundry appear effortless. Their inventory has many various types, and they also provide trendy, simple, conventional models.

The Maytag Centennial washer is one such modern model. The fantastic features that it includes make it look extremely affordable.

Still, you may want to reconsider that assumption because all of the simplicity of use appears to have come at the expense of making some severe faults!

Maytag Centennial Washer Not Spinning

maytag centennial washer not spinning 2022 issue

We will discuss here why the Maytag centennial washer is not spinning.

Check the Wash Cycle and Spin Setting

When the washing machine stops spinning, it could be because the settings are too high for your load.

You probably used a delicate setting on a heavily soiled load, which caused the washer to stop spinning because the stage is set for soft fabrics.

Using a gentle or hand wash cycle on a load of whites could also result in the laundry machine stopping spinning.

The reason is that whites are not very dirty, and once there is enough water and soap to clean them, there’s no need for more action from the spin motor.

When this halt happens, we can change the engine’s speed by changing settings from less intense to higher intensity as per our requirement.

Check the Lid Switch

Examine the lid switch if your Maytag top-load washer isn’t spinning your clothes dry. This handy function keeps the machine from turning when the lid is open.

If it fails, you will not have dry clothes, even if the washer lid is closed. First, check to see if the plastic tab on the front of the lid is damaged.

When you close up, this little button presses down on this switch, which is easily broken off or damaged. If everything checks out, it’s likely that the switch has failed and needs to be replaced.

Clean the Drain Hose

A common problem faced by Maytag Centennial washers is caused by accumulated sediment buildup in the drain hose.

Sometimes, users may find it difficult to locate exactly where the problem might be, but there’s a straightforward solution to correcting this.

All you need to do is look at one end of the drain hose and check for any difference in appearance compared to the other end.

If a clogged-up material accumulates inside, the affected areas will have visibly noticeable differences compared with the rest of the hose.

Check Drive Belt

drive belt replacement washer 2022

 

 

If your Maytag washer is not working properly and you have attempted to solve the issue independently, it is recommended to contact a technician for assistance.

Maytag washers that do not spin will require schematic diagrams to determine what caused the original problem that led to future issues.

A portion could be broken or disconnected, resulting in the loss of full components such as your motor. If you contact and tell them about the belt difficulties, they will know where to look for it and what measures to take when deciding whether to repair or replace it.

Repairing your Maytag washer may sometimes cost more than purchasing a new one, especially if you do not use an authorized repair provider!

FAQs

What is causing a Maytag Centennial washer not to spin?

One of the most common reasons a Maytag top load washer won’t spin is that a load of clothing is uneven or jammed.

If you’re washing a large bag of clothes, ensure they’re uniformly distributed around the drum and not clumped together on one side.

If so, carefully redistribute them across the drum to balance the pressure. In the same vein, if your garments are extremely wrinkled, hang them out to dry while still damp, and then run a cycle in the washing after drying.

How do you reset a Maytag washer’s code?

To reset the cycle on your washer, press the cancel button and then the stop button quickly. If the issue persists, unplug your appliance or turn off the power for a full minute before reconnecting.

Something is stuck inside your machine, preventing some of your parts from reaching the wash zone, and it must be restored to its original place to resolve this issue.

Related Guides

Leave a Comment