How To Unlock a Push Lock Door
How to unlock a push lock door? Unforeseen circumstances are never favorable. There are situations where one might be stuck inside their homes during unexpected inclement weather.
Once such a situation is when you’re locked in your bathroom or bedroom. As an added security measure, many homes in the United States have installed privacy door lock as standard to replace traditional brass doorknobs.
If you find yourself alone and trapped inside your home because of a lost set of keys or if somebody has locked your home’s exterior door, there are ways for you to be able to twist the privacy door lock yourself.
Many people choose to call locksmiths instead immediately. Still, you can easily turn on the locking mechanism yourself with some determination and resilience so someone can come to assist you from outside as soon as possible.
How To Unlock a Push Lock Door
You will typically follow this process to unlock a door with a deadbolt lock. Look for a small hole on the outside of the door handle that resembles a keyhole.
This is generally easier to find in older buildings as newer buildings use digital locks that may not have this visual feature.
Once you’ve located the deadbolt lock and inserted your tool (for example, a wire or hairpin), rotate it from left to right until you feel resistant pressure.
When the tool has reached maximum resistance, remove the tool and apply slight pressure to push open the door.
Here are 4 simple ways to get into a bathroom or bedroom when you’ve forgotten your key:
1. Substitute Key or Screwdriver
If you find yourself in this situation and don’t have a spare key to get inside, there are some alternatives out there that you can use.
For example, one of the most common keys is a flat head screwdriver. Using this simple instrument, go as far into the lock as possible and when you feel like the wave is moving or rotating around to your side.
Remove the tool and experiment with turning it until there is a click sound. It could be pretty effective if you give it a try.
2. Metallic Coat Hanger
A latch bolt or deadbolt on a bedroom or bathroom door is called a locking mechanism, and it can open doors that are otherwise shut tight.
This comes in handy if you have locked yourself out of the house or don’t have your cell phone on hand to call James Bond for help! If this happens to you.
Try bending a coat hanger until the center is curved to resemble a handle, with the end of the hanger sharpened (for convenience) so it resembles a hook.
Now place the narrow end between the door and its frame, not allowing any gap. Next, scrape along the edge of the lock from beneath to slide past it to unlock it. Lift on that handle, and you should be able to get inside.
3. Credit Card
A credit card can be a handy tool for unlocking latch bolt and spring-latch locks, but that doesn’t mean you can use your credit card to open all door locks.
Make sure that if you decide to use your card to unlock a certainty that you have no intention of damaging it because a damaged credit card will certainly prevent you from using it for its intended purpose.
You may also want to consider looking into other options such as flat or flexible cards or stiff, laminated cards, especially if they are made with stainless steel.
But whatever you do, be careful of the locking mechanism unless you want the door stuck shut, in which case the powerful magnet in your card will come in handy!
Slip your credit card onto the crack between your doorposts and the frame on both sides, and then gently bend one end of your card back so that it hooks around the deadbolt lock from inside.
4. Paper Clip with Tension Wrench
A hard paper clip is a great tool to use in an emergency. You have to bend one side and then straighten it out as much as possible with another until it looks like a long straight line.
Then you put the straight part into what we would call the keyhole, or the hole below the doorknob and above the lock.
A tension wrench is like a small hex key. It’s available at any hardware store, and it works to create tension inside a lock.
One should insert the wrench into the bottom of the safety and rotate it to create pressure on the lock.
When one fiddles with the paperclip inserted on top of the wave, a clicking sound will be heard from within. The door will open when that happens.
Related Posts
