How To Fix Squeaky Floors Under Carpet
How to fix squeaky floors under carpet? The first thing you have to do is find the sound source. Therefore, could you take off the mat and examine it.
If there’s nothing wrong with the carpet itself, look below it. Glue down your subfloor if there are some broken nails, or replace the damaged subfloor with plywood or OSB and glue it down again.
After that, put down new boards. You may also put a pad between carpet and subfloor-like underlayment material for better sound isolation.
The last step is to replace your door thresholds if they aren’t solid wood or seal, then if you can’t replace them because of budget or other reasons.
How To Fix Squeaky Floors Under Carpet
squeaky floors under carpet can be annoying as it’s difficult to walk around without making a noise all the time.
But unfortunately, quite a large number of homeowners are facing this problem and don’t know how to fix it.
Many people have tried using different kinds of products; some have got success while others haven’t.
To help you find the right solution we’ve came with steps guide of the most effective ways to solve this issue so that your space becomes peaceful again.
1. Find the Squeak
The squeaky wheel gets the grease. So, if you want to get rid of a persistent noise that drives you nuts, like squeaky floorboards.
For example, you have to walk all over the carpet until you find the source of the sound using the paper clip method (not recommended for hardwood or laminate floors!).
Then, once you’ve located it, mark down the position with masking tape or a sticky note and scrutinize this area.
If there are several squeaky areas in your home, then it might be a good idea to enlist some help from someone else so you can cover more ground in less time.
2. Find the Joist
Once you have located the squeak in your house and are ready to repair it, it’s good to know that as opposed to a floor joist, which is usually one of the support beams underneath your house.
Aside from finding the source of a sound or odor issue, the essential foundations know what type of floor you have.
There’s always a version for each room or space, like the attic if it has one. When you’re done, a great product will notice these details help make a final design meet requirements.
3. Hammer
Once you identify the problem, you’ll next want to look for a solution. As you might know, joists are beams underneath your house, and their role is to support your home’s weight.
Today, most places have floor joists that are 16 inches apart from their neighbors, but homes built before the 19th century may not follow this format. There is an easy way to determine where these joists rest for these homes.
4. Stud Finder
Finding a joist can be easier than you might think. Using a stud finder, this task can become quite simple, mainly when the correct method is employed during the process.
Typically, the first step in locating a joist using this tool is turning it on and moving it slowly over your home or office’s carpeted flooring.
In most instances, a stud finder will send out beams of light which indicate when a shaft has been found under your feet.
After taking note of its findings, you may wish to mark off the location of your future joists with masking tape or similarly sticky notes.
5. Joist Finding Tool
Many homeowners don’t realize that the easiest way to find your joist is by using a joist finding tool that comes in handy with a floor repair kit.
This device has minimal threads, so drilling it into your carpeted surface will not damage it or leave holes behind.
Using this tool, dig straight down perpendicular to your wall and see if you come into contact with one of the joists on the floor or not, as this will tell you how you need to proceed from there.
Then repeat with different drill holes until you hit a place where you know the joists are located.
6. Insert Screws
There are two main ways to insert screws. The first method is to use the special crews made for floor repair kits that aren’t included in a Standard Wood Repair Kit.
However, an alternative option would be to drill a hole with a screwdriver and then place the bolt in there before hammering a fastener into it via a nail/staple gun.
7. Drive the Screws
Once the two screws have been inserted at the opposite ends of the specific joist, you should tie a string around one of the screws and then stretch out said string toward the other screws located on the opposite end of its post.
Afterward, these newly-inserted screws should be screwed into the floor within an overall eight-inch distance from each other.
As soon as this step has been executed, it’s time to move on to working with another joist. A similar formality may need to be completed instead of proceeding skillfully and precisely with this task at hand.
8. Remove the Screw Heads
The last step is to remove the screw heads. If you’re using a floor repair kit, they will easily break off.
However, if you’re using deck or drywall screws, this step will be a bit challenging because these types of screws are designed to be complicated.
From there, you can drip the head of the screw with the pliers until it becomes soft so that you can then flip and turn back and forth until it breaks off with some channel lock pliers.
Related Posts
