How to clean slate floors? Slate tiles are similar to other tiles, but in fact, they’re more robust and more stable than ceramic tiling because slate tile is usually a fine-grained metamorphic rock.
Slate tile is made from stone to last much longer than ceramic tiles made of clay. Similar to other types of flooring, we know that slate tiles can be damaged if you drop something heavy on top of them or throw something against them.
But under normal conditions, slate tiles will give you support for longer than many types of flooring. No matter how durable slate tile is, it’s likely that individual tiles will chip, crack, or be damaged without getting the chance to repair during installation.
As strong as it can be, slate tile is still one of the most accessible flooring types to improve. If you have a damaged tile, scrape the grout slightly near the edges of the tile, then break it away and chop it up.
Once that’s done, choose to remove any old adhesive left in place by scrapping it out and lifting the board back up – all this should take little time at all!
How To Clean Slate Floors
When it comes time to wash a slate tile floor, the best thing you can do is use any soft cloth capable of using an appropriate cleaning product.
For example, if your slate tiles are made from natural stone, and you are washing it down carefully with a pH-neutral cleaner, then it’s OK to use any soft clothes that you want as long as they’re not soaking wet.
It’s also essential to make sure not to saturate the stone so that there isn’t too much water left on the surface upon completion because this could mean erosion over time, leading to expensive repairs later on.
It is always a good idea to choose a great vacuum cleaner and get into the habit of sweeping or vacuuming every day.
If you have hardwood floors, consider using the same head you would use on your hardwood floors because they will have soft wheels designed to reduce friction and avoid scratching.
Remember that tiles may be more complex than they appear, so it’s essential that you use the right equipment if you plan to use a lot of elbow grease because otherwise, you could end up with unsightly scratches.
Sweep or vacuum every day to remove any dirt or debris and reduce the time required for mopping regularly. It will prolong the life of your slate tiles.
The second part of your cleaning routine is to use warm water and mild detergent to mop your shiny floor.
One way that you can clean your polished floors without hurting them or making any unnecessary holes is by using a reusable mop with a microfiber head to whisk away any stains.
While you can mop as diligently as needed, there’s no need to scrub so hard that brittle particles flake off of the floor.
Try to clean in one direction, as this stops small pieces (from dust and other hazards) from collecting in the grooves between tiles of your floor.
Be sure to use damp microfiber fabric when mopping ceramic tile floors but not wet enough so as not to create streaks on large slate ceramic tiles floors.
Once you’ve washed your slate floors and removed any spots that required special attention, it’s a good idea to rinse the floor with water to ensure no soapy residues are left behind, which could leave an ugly layer of buildup. To do this:
- Rinse your mop or fit with a new cleaning pad.
- Mop as you usually would, but with only clean water.
- Be sure not to wet the floor too much but make sure any remaining soap residue is washed away before proceeding onto the grouting process.
Slate floors are beautiful, and you should be very careful when cleaning them because they can easily be damaged. Make sure you dry your slate floor properly.
If time is of the essence, your foot may need to air dry, or you might use a fan for faster results. You can also invest in a buffing machine if you’re in a rush, but take care to set the pressure on low if you decide to purchase one of these.
5. Polish or Oil
Slate is very porous, which means it will absorb accidental spills (or sometimes even less than unintentional spills). That’s why it’s essential to clean Slate and all stone flooring regularly.
The oil or wax that comes along with cleaning will help keep your Floor Shine, especially after regular traffic wears the Shine away.
Sometimes a thicker coating can be applied, but this should be done sparingly so as not to clog the spaces between the item grains. This process should be repeated 1-2 times a month, depending on how often your Slate is used.
How to clean slate floors. Cleaning your slate floor may seem like a big task, but it’s not. By simply preparing your cleaning solutions ahead of time.
You’ll be able to save yourself a lot of trouble when it comes down to getting the job done. To help keep your floor looking brilliantly colored and well-maintained.
All you need is some soap and water for working away any buildup or dirt that might’ve built up over time. If you want to ensure your Slate always looks shiny and clean, then this should be used regularly.
You should make sure you’re careful with your floor by avoiding strong solvents and abrasive product.