How To Clean Fridge Water Dispenser
How to clean fridge water dispenser. While most people don’t give a second thought to where their fresh, cold water comes from when it’s supplied directly to their refrigerator dispenser, it can become very unpleasant over time.
As some may know, yeast, mold, and other nasties can grow inside a store-bought bottle, causing a dispenser to become filthy.
It can be rather unpleasant when you go in for your daily glass of water and instead find something unpalatable.
Fortunately, there’s an incredibly simple technique to wipe out the dispenser itself and the area beneath where the bottled water would normally sit to prevent future buildup!
If you want to clean your fridge thoroughly, follow the instructions below.
How To Clean Fridge Water Dispenser
We will discuss here the steps of cleaning the fridge water dispenser.
Step 1: Disconnect the Water
When you want to clean your water dispenser, don’t forget to disconnect the water first. If a dispenser has a retail system built-in, it can be dangerous.
But it would help if you disconnected it from the system by turning off the valve that controls the water flow inside your refrigerator or freezer.
Once you turn off the valve, loosen and remove the screws threading into the main pipe. Mix vinegar with warm water, and pour into the valve leading up to the water reservoir.
Step 2: Wash with Vinegar
White vinegar is such a powerful and versatile household cleaner. It’s even edible, which makes it all the more useful.
The best thing about white vinegar is that it puts out all those overwhelming smells in your refrigerator or freezer that are caused by spoiled food or fresh fruits and veggies.
Just get a small funnel and place it at one end of the tube into the water reservoir. You will want to fill two-to-three cups of white vinegar into the water tank so that the water pushes from the bottom up through to where you will be able to drink it thirty minutes later.
Step 3: Clean the Nozzle
The nozzle comes next. You’ll need a toothbrush that hasn’t been used in a long time to clean it. It must be washed before and after scrubbing the dispenser’s inner workings.
Pour some vinegar on the brush and use it to clean all of the dispenser’s surfaces. This procedure will clean every part of your dispenser thoroughly, leaving no filth behind!
Step 4: Reconnect the Water
You’re probably done with the internal cleaning, and you can turn the water back on. Be sure to tighten down the screws there before (and note how they were fastened before removing), so there’s no leakage.
Turn on the valve to let the water flow freely again and run some clean water through it just for good measure.
Step 5: Clean the Outside
Pour vinegar on a cloth or spray bottle and wipe down the surface to lift any buildup or debris from previous use.
Wipe with another clean, dry cloth after thoroughly removing the vinegar solution, as this removes any lingering vinegar odor!
FAQs
How often should the water dispenser in the refrigerator be cleaned?
A fridge with a water dispenser can be a convenient feature. You can drink it directly from the refrigerator, or if you’re feeling hot, you can have it chilled.
But what’s even better about this appliance is that many of them come with an internal filter to ensure your water is clean and bacteria-free.
It is important to clean your fridge and its inner parts regularly – ideally once every two months to maintain this feature!
Which is better for killing mold: bleach or vinegar?
Vinegar-based cleaning solutions are a much more effective way of dealing with mold than bleaches. The Environmental Protection Agency states that bleach is not recommended for use in instances of decay, except in special circumstances.
They do not recommend using bleach because bleaches contain very strong phosphoric acid, which kills the mold and damages some flooring, and leaves a toxic residue behind.
Conclusion
How to clean fridge water dispenser. From the above, it is easy to comprehend that cleaning a fridge, ice maker, and water dispenser only requires you to follow five or so steps to finish the job.
The entire task can be completed within minutes using the steps mentioned above! This should be done twice per year before any problems arise that could make ice production difficult or near impossible.
Practices like this will keep your refrigerator working properly for years (or decades)!
Related Guides
