Frigidaire washer wont drain
Frigidaire washer wont drain. If your Frigidaire washer won’t drain, it can be a frustrating and time-consuming issue to deal with.
Not only will the washer fail to properly clean your clothes, but it may also leave them wet and soggy.
Frigidaire washer wont drain
In this article, we’ll explore some common causes of a Frigidaire washer that won’t drain, as well as some potential solutions.
Cause 1: Clogged drain hose
One of the most common causes of a Frigidaire washer that won’t drain is a clogged drain hose.
The drain hose is responsible for carrying the water from the washer to the drain, and if it is clogged, the water will be unable to flow through it properly.
To check for a clogged drain hose, follow these steps:
- Locate the drain hose. The drain hose is typically located at the back of the washer, near the bottom.
- Check the hose for any visible signs of blockages. Look for debris, lint, or other materials that may be preventing the water from flowing through the hose.
- Clear any blockages from the drain hose. Use a small tool, such as a toothbrush or a pipe cleaner, to gently remove any blockages from the hose.
Solution 1: Check and clear any blockages
If you’ve identified a clogged drain hose or drain pump as the cause of your Frigidaire washer not draining properly, the first step is to check for and clear any blockages.
Use a small tool, such as a toothbrush or a pipe cleaner, to gently remove any debris or lint from the hose or pump. If you’re unable to clear the blockage, it may be necessary to replace the hose or pump.
Cause 2: Clogged drain pump
Another common cause of a Frigidaire washer that won’t drain is a clogged drain pump. The drain pump is responsible for moving the water from the washer to the drain, and if it is clogged, the water will be unable to flow through it properly.
To check for a clogged drain pump, follow these steps:
- Locate the drain pump. The drain pump is typically located at the back of the washer, near the bottom.
- Check the pump for any visible signs of blockages. Look for debris, lint, or other materials that may be preventing the water from flowing through the pump.
- Clear any blockages from the drain pump. Use a small tool, such as a toothbrush or a pipe cleaner, to gently remove any blockages from the pump. You may also need to remove the pump from the washer to access and clear any blockages.
Solution 2: Replace the drain hose or drain pump
If the drain hose or drain pump is damaged or not functioning properly, it will need to be replaced to restore the performance of your Frigidaire washer.
To replace the hose or pump, you’ll need to follow the instructions in the user manual for your washer and use a screwdriver to remove the old hose or pump and install the new one. Be sure to use caution when handling the hose or pump, as they may be hot to the touch.
Cause 3: Malfunctioning drain pump
In addition to clogs, the drain pump may also malfunction, causing the washer to not drain properly.
To check for a malfunctioning drain pump, you’ll need to use a multimeter to test the pump for continuity. To do this, follow these steps:
- Locate the drain pump. The drain pump is typically located at the back of the washer, near the bottom.
- Disconnect the pump from the washer. Use a screwdriver to remove the screws that hold the pump in place, and gently pull the pump out of the washer.
- Test the pump for continuity. Use a multimeter to test the pump for continuity by placing the probes on either end of the pump. If the multimeter registers continuity, the pump is functioning properly. If the multimeter does not register continuity, the pump will need to be replaced.
Solution 3: Check for other issues
If you’ve checked the drain hose, drain pump, and the rest of the washer and are still unable to determine the cause of the issue, it may be helpful to check for other issues that could be causing the washer to not drain properly.
Some other potential causes to consider include:
Malfunctioning water inlet valve: The water inlet valve is responsible for regulating the flow of water into the washer. If the valve is not functioning properly, it can cause the washer to not drain properly.
Faulty water level switch: The water level switch is responsible for detecting the level of water in the washer and activating the drain pump as needed. If the switch is not functioning properly, it can cause the washer to not drain properly.
Wiring issues: If the wiring within the washer is damaged or loose, it can cause the washer to not drain properly.
FAQs
Why won’t my Frigidaire washer drain?
There are several possible causes of a Frigidaire washer that won’t drain, including a clogged drain hose, a clogged drain pump, and a malfunctioning drain pump. It’s important to diagnose the issue and address it in order to restore the performance of the washer.
How do I unclog my Frigidaire washer drain pump?
To unclog a Frigidaire washer drain pump, you’ll need to locate the pump, which is typically located at the back of the washer near the bottom.
Check the pump for any visible signs of blockages, such as debris or lint, and use a small tool, such as a toothbrush or a pipe cleaner, to gently remove the blockages.
If you’re unable to clear the blockage, you may need to remove the pump from the washer to access and clear it.
Can I replace the drain pump myself?
In most cases, replacing the drain pump on a Frigidaire washer is a task that can be tackled by most homeowners with some basic appliance repair skills.
However, if you’re not comfortable working with appliances or if you’re not sure how to diagnose the issue with your washer, it’s always a good idea to consult a professional.
Is it dangerous to work on my Frigidaire washer?
There is some risk involved in working on a Frigidaire washer, as it may require handling electrical components or disassembling the appliance.
It’s always a good idea to follow all safety precautions and use caution when working with appliances. If you’re not comfortable handling the task yourself, it’s always a good idea to consult a professional.
Conclusion
If your Frigidaire washer won’t drain, it can be a frustrating and time-consuming issue to deal with. By identifying the cause of the issue and addressing it, you can restore the performance of your washer and get back to doing your laundry with ease. Whether you’re dealing with a clogged drain hose, a clogged drain pump, or another issue, with some basic appliance repair skills and the right tools and supplies, you can handle this task yourself. If you’re not comfortable handling the task yourself, it’s always a good idea to consult a professional.
Related Guides
