| |

Electrolux washer error code e21

Electrolux washer error code e21. If you see the error code “E21” on your Electrolux washer, it means that there is a drain error.

This error can be caused by a few different issues, and it is important to troubleshoot and fix the problem as soon as possible to prevent further damage to your washer.

Electrolux washer error code e21

Electrolux washer error code e21 2023 guide

Here are some common causes of the “E21” error and solutions for each:

Cause 1: Clogged drain hose

One of the most common causes of the “E21” error is a clogged drain hose. The drain hose is responsible for carrying water out of the washer and into the drain.

If the drain hose is clogged, it can prevent water from draining properly, resulting in the “E21” error. To fix this issue:

Solution: Clean the drain hose

To clean the drain hose:

  1. Locate the drain hose, which is usually located on the back of the washer or under the washer.
  2. Disconnect the drain hose from the washer and the drain.
  3. Inspect the drain hose for any visible blockages, such as lint or debris.
  4. If you see any blockages, remove them and flush the drain hose with water.
  5. Reconnect the drain hose to the washer and the drain and run a test load to see if the problem is resolved.

Cause 2: Clogged drain pump

If the drain hose is not the issue, the next thing you should check is the drain pump. The drain pump is responsible for pumping water out of the washer and into the drain.

If the drain pump is clogged or damaged, it can cause the “E21” error.

To fix this issue:

Solution 1: Clean the drain pump

To clean the drain pump:

  1. Locate the drain pump, which is usually located on the back of the washer or under the washer.
  2. Disconnect the drain pump from the washer and inspect it for any visible blockages, such as lint or debris.
  3. If you see any blockages, remove them and flush the drain pump with water.
  4. Reconnect the drain pump to the washer and run a test load to see if the problem is resolved.

Solution 2: Replace the drain pump

If cleaning the drain pump does not fix the problem, the drain pump may be damaged and will need to be replaced. Follow the manufacturer’s instructions for replacing the drain pump.

Cause 3: Faulty water level sensor

Faulty water level sensor

Another potential cause of the “E21” error is a faulty water level sensor. The water level sensor is responsible for measuring the water level in the washer and ensuring that it is within a certain range.

If the water level sensor is faulty or not functioning properly, it can cause the “E21” error.

To fix this issue:

Solution: Replace the water level sensor

To replace the water level sensor:

  1. Locate the water level sensor, which is usually located behind the washer control panel or near the water inlet valve.
  2. Disconnect the water level sensor from the washer and remove it.
  3. Install a new water level sensor and reconnect it to the washer.
  4. Run a test load to see if the problem is resolved.

Cause 4: Damaged drain pump relay

If the water level sensor is not the issue, you should check the drain pump relay. The drain pump relay is responsible for controlling the drain pump and ensuring that it functions properly. If the drain pump relay is damaged, it can cause the “E21” error. To fix this issue:

Solution: Replace the drain pump relay

To replace the drain pump relay:

  1. Locate the drain pump relay, which is usually located behind the washer control panel or near the drain pump.
  2. Disconnect the drain pump relay from the washer and remove it.
  3. Install a new drain pump relay and reconnect it to the washer.
  4. Run a test load to see if the problem is resolved.

I hope these troubleshooting solutions have been helpful in fixing the “E21” error on your Electrolux washer. If you have any additional questions or if the problem persists, it may be necessary to consult a professional appliance repair service.

FAQs

What does “E21” mean on an Electrolux washer?

“E21” on an Electrolux washer means that there is a drain error.

What causes the “E21” error on an Electrolux washer?

The “E21” error on an Electrolux washer can be caused by a clogged drain hose, clogged drain pump, faulty water level sensor, or damaged drain pump relay.

How do I fix the “E21” error on an Electrolux washer?

To fix the “E21” error on an Electrolux washer, you can try cleaning or replacing the drain hose, cleaning or replacing the drain pump, replacing the water level sensor, or replacing the drain pump relay.

If the problem persists or if you are unable to fix it yourself, it may be necessary to consult a professional appliance repair service.

Can I fix the “E21” error on an Electrolux washer myself?

In many cases, you can fix the “E21” error on an Electrolux washer yourself by cleaning or replacing the drain hose, cleaning or replacing the drain pump, replacing the water level sensor, or replacing the drain pump relay.

However, if you are unable to fix the problem or if the issue persists, it may be necessary to consult a professional appliance repair service.

What should I do if I can’t fix the “E21” error on an Electrolux washer myself?

If you are unable to fix the “E21” error on an Electrolux washer yourself or if the issue persists, it may be necessary to consult a professional appliance repair service.

A trained appliance repair technician will be able to diagnose the problem and provide a solution to fix it.

Conclusion

In conclusion, the “E21” error on an Electrolux washer indicates that there is a drain error. This error can be caused by a clogged drain hose, clogged drain pump, faulty water level sensor, or damaged drain pump relay. To fix the problem, you can try cleaning or replacing the drain hose, cleaning or replacing the drain pump, replacing the water level sensor, or replacing the drain pump relay. If the problem persists or if you are unable to fix it yourself, it may be necessary to consult a professional appliance repair service. By troubleshooting and fixing the “E21” error, you can prevent further damage to your washer and ensure that it is functioning properly.

Related Guides

Similar Posts